- REN filter housings
target medium-to-high pressure applications. 5200 Series are rated for
operating pressures up to 28 bar (400 psi) and all housings are proofed
at 70 bar (1000 psi).
- Flow capacities
range from 30 to 300 gallons per minute, but it is recommended that
they be used at substantially lower flows to increase efficiency and
dirt holding capacity.
- REN filters accept
industry standard 7"x18", disposable pleated paper type elements
that are available from several approved venders.
- The REN basic housing
contains two (2) elements, but to accommodate higher flow ranges, multiple
manifold units are added
- The REN housing
design yields extremely low clean element pressure drop.
- For maximum reliability,
a no bypass design is used. Housings are designed to be fitted with
Orange Research differential pressure transducers.
- Hanging elements
are used wherever extremely contaminated conditions occur such as with
gear pump testing.
- Also available
in single and multiple unit configuration.
Maximum. Flow Rate per element 30 gpm, 114 l/m
Maximum Working Pressure 600 psi (40 bar)
Proof Pressure 1000 psi (70 bar)
Single Housing, Single Element 11"l x 11"w x 30"h
Single Housing, Dual Element 11"l x 11"w x 48"h
Kaydon KF6018-05 or Pall HC0202FKP18H
Custom Solutions |
Our Products |
Customer List |
Frequently Asked Questions
Technical Articles |
Company Profile |
Web Links |
Ren Corporation Hydraulic Test Equipment - Home
5900 S. Perkins Rd.
Stillwater, OK 74074
Phone: 405.533.2700 ~ FAX: 405.533.2705
Site Design and Internet Marketing by Webolutions Inc.